MANUFACTURING / Fibre Glass Projection / Injection of concrete resin

- Work on the mould
- The mould passes through the painting cabin
- Spray gun projection of fibre glass on the fibre mould in two layers (pictures 1-3)
- Laying the re-enforcement mat in the bottom of the bathtub glued with a third layer of fibre glass
- Removing bubbles (pictures 4-6)
- 24 hour drying (picture 7)
- Removal from the mould by air injection (pictures 8-11)
- Removal from the lathe (pictures 12 and 13)
- Polishing (pictures 14-16)
- Projection of the peelable protection layer (pictures 17 and 18)
- Hydro massage mounting (pictures 19-25)